Test- strips Triglycerides No. 5 to the express analyzer multiCare-in

Test strips for determining the level of triglycerides in the blood.

Used in conjunction with the multiCare-in express analyzer

The test is based on the reaction of the ingredients: Lipase / Glycerol kinase / Glycerol phosphate oxidase / Peroxidase / Chromogen.

The color intensity of the colored compound resulting from the reaction is proportional to the concentration of Triglycerides in the blood.

Structure:

The reagent area of ��each test strip contains:

Chromogen 0.017 mg

Lipase 1.02 IU

Glycerol-3-phosphate oxidase 0.31 IU

Glycerol kinase 0.41 IU

Peroxidase 1.2 IU

ME is a mass unit.

Equipment:

5 test strips

Code-chip Triglycerides"

Instructions

Storage and handling:

Test strips must be used within 90 days after opening the bottle or before the expiration date indicated on the package.

Shelf life is valid when stored at 5-30 В° C (41-86 В° F).

Application:

Open the Triglycerides multiCare-in test strip container and take out the yellow code chip.

Insert the code chip into the special hole on the side of the device.

Open the vial, remove the test strip and close the vial immediately.

Insert the test strip into the test strip slot on the meter, with the arrows pointing towards the meter.

An acoustic signal ("beep") will sound.

The TGL symbol and Code should appear on the instrument display.

Check that the Symbol and Code shown on the display match the Symbol and Code printed on the label of the test strip vial.

Wash your hands with warm water while massaging the finger you are about to pierce to increase blood flow.

Relax and lower your arm down along your body for about 1 minute.

Pierce your finger with a sterile lancet lancing device.

Wipe off the first drop of blood with sterile gauze and gently squeeze the tip of your finger to obtain a second drop of blood (10 microliters).

Touch the drop of blood to the white circle of the portion of the test strip protruding from the meter.

The test strip will automatically draw the correct amount of blood.

Touch the drop of blood to the test strip until moving segments appear on the meter's display (meter beeps).

After a few seconds, the display will show the result.

To avoid contamination, use the reset button on the back of the meter to remove the used test strip.

Only one drop of blood is taken from each pierced finger for one measurement!

There are contraindications.

it is necessary to consult a doctor and read the instructions.

Equipment

Test strips - 5 pcs.

Instructions for use - 1pc.

Code-chip - 1 pc.

Specifications

Manufacturer country

Italy

Item weight, g

27

Expiration date in days

730

A type

Blood glucose meter

Brand name

MultiCare in

Package weight, g

25

"