Test strips Aichek 'iCheck' # 50 (+ lancets # 50)

ICheck test strips No. 50 are intended for electrochemical determination of glucose levels in fresh capillary whole blood taken from a finger.

They are used in conjunction with the ICEK glucometer.

ICheck # 50 test strips have a number of advantages, such as:

Capillary test strip - draws in the required volume of a drop of blood in 1 second.

Special protective layer - allows you to touch any part of the test strip.

Special contact strips - eliminate the possibility of error. (If the test strip is inserted incorrectly, the device will not turn on.)

Special control field - changes color and indicates if there is enough blood.

Double precision control - the two-electronic structure provides a comparison of the results of the two working electrodes.

ICheck test strips No. 50 are designed to determine glucose levels.

For the analysis, a drop of blood with a volume of 0.9 ОјL is sufficient.

Testing time is 9 seconds.

The sip in function makes it easier to apply blood to the test strip.

When a drop of blood touches the edge of the reaction zone, blood is absorbed into the reaction zone by means of microcapillary diffusion.

They are intended for in vitro diagnostics both at home and in hospital.

The measuring range is 20-600 mg / dL (1.1-33.3 mmol / L).

The diagnostic accuracy of the analysis is 94%, which meets the requirements for professional equipment.

BASIC PARAMETERS OF THE TEST STRIP

Electrochemical measurement method

Test time no more than 9 seconds

Capillary whole blood (plasma calibrated)

Blood collection with capillary aspiration without additional accessories

Measurement carried out with an error of no more than 15%

The shelf life of test strips is 18 months from the date of manufacture

Storage conditions at temperatures from 0 В° to 45 В° C.

Calibration using a code-chip (guarantees the accuracy of the result)

Complete with lancets, MUST be changed every time (to avoid infection)

Technical

Specifications:

Test strip size 38 x 10 x 0.6 mm

Lancet diameter 0.36 mm

Equipment:

tube of 50 test strips

50 sterile lancets iChek"

Coding strip

Instructions

Storage and handling:

ICheck test strips No. 50 must be used within 90 days after opening the tube or 18 months from the date of manufacture.

Shelf life is valid when stored at 2 В° to 30 В° C (36-86 F) and RH < 80%

Application:

Take out one test strip and immediately close the vial lid tightly.

Insert the test strip into the meter (black stripes first).

When inserting a test strip, you can grab any part of it.

Place the lancet device against the side of the fingertip and press the lancet button.

Touch your fingertip to the blood application point on the test strip and hold until the reaction zone fills with blood.

Check the result in 9 seconds.

Remove the test strip from the meter.

Discard it and the lancet in a puncture-resistant container.

There are contraindications.

it is necessary to consult a doctor and read the instructions.

Equipment

tube of 50 test strips

50 sterile lancets "iChek"

Coding strip

Instructions

Specifications

Manufacturer country

Taiwan

Brand name

iCheck

A type

Test strips

Package weight, g

155

"